Quick Answer: How Do I Make Back Tab Curtains?

How far apart should tabs be on tab top curtains?

To determine how many tabs you’ll need, put one at both outside edges of the curtain.

Then space the rest out evenly, around 6″ to 8″ apart.

The width of the tabs will usually be around 1½” to 2″.

For a 2″ width, start by cutting out pieces with a 5″ width (and the length you decided on in Step 1)..

Can you hang back tab curtains with hooks?

Many drapes come with back tabs where you can clip the rings, or you can pinch the fabric to create pleats. … When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining. Thread the hole in the ring through the hook to attach.

How can I make my curtains slide easier?

But if your curtains are a hassle to slide open and closed, it can make you wonder if they’re even worth it….There are several things you can do to help your curtains slide more easily:Dry silicone spray.Curtain slide tape.Measuring tape.Custom-cut curtain rod.

How do I make my curtains close in the middle?

To simply keep the curtains closed, place the magnets just inside the vertical edge where one panel meets another. To seal all the curtain’s edges to the window opening, position the magnets across both sides and the bottom, if not the top of the curtain as well.

Should I line my curtains?

Thinner cotton or polyester curtains should be lined, however, to stop them looking washed out. Even top treatments can be worth lining, because it will help to extend their life, and stop them fading. It’s relatively easy to add lining to the back of your curtains.

How do you make drapery panels?

InstructionsCut the Materials and Sew the Bottom Fabric Hem. Install your curtain rod, and hang the rings you’re going to use. … Sew the Bottom Hem of the Lining. … Sew the Lining and Fabric Together. … Press the Drape. … Fold the Raw Fabric Edges. … Measure for the Top Hem. … Stitch the Top Hem. … Finish the Drape.

What are hidden tab top curtains?

Back tab curtains, also called hidden tab curtains, have tabs or loops sewn onto the back of the curtain header. The rod slips through the tab so that neither is visible from the front. This gives the illusion of the curtain floating in space and creates an elegant, clean line.

How much does it cost to make your own curtains?

To get a ballpark figure, take the cost of making a curtain, usually around $10 to 15 an hour or $20+ per panel and go from there. Alterations can be a lot of work.

Are back tab curtains easy to open?

Opening and closing tabbed curtains is a bit more difficult than with rings, as rings slide easily along the rod.

How long are tabs on curtains?

Each tab will be eight inches long, and you’ll be spacing the tabs every six inches along the top of the curtain. To find out how long the tab piece needs to be, multiply the number of tabs by eight. If necessary, you can cut your tabs from multiple strips of fabric.

What are back tabs on curtains?

What Are Back Tab Curtains? Back tab curtains have hidden strips of fabric tabs sewn on the back of the curtains. You can either slide these loops directly onto the curtain rod, or attach rings with clips to the loops.

How do you line up curtains without sewing?

Simply place the hemming web tape between the two fabrics and then using a standard iron press together until they are bonded. Start by working from the top of the curtain to the bottom keeping the hemming tape and fabric in place with the help of sewing pins.

How do you make back tab curtains slide easier?

Steps:After you’ve sewn your side hems, iron down your top hem.Lay out the tape over the top hem you just ironed, positioning the first tab so that it sits close to the side of the panel.If it works out perfectly, once you roll the tape across, a tab will also fall at the opposite side of the panel.More items…•